Description

Highlights:

• Used to create air space between the heat shield and the wall or ceiling
• Allows a convection flow of air between the heat shield and the combustible surface
• Prevents the stove’s heat from reaching the surface behind it
• Used to safely reduce minimum wall and ceiling clearances between the heat shield and the wood stove
• 4 pack contains: 10 spacers, 10 screws (64 mm), 10 anchors
• Support your Stove Board 1 inch above floor (Rest on wood blocks or similar spacing material)
• Lightly work anchor holes 16’’ apart around perimeter of Stove Board . Locate one anchor in each corner. Do not place any anchors directly behind heating unit
• Place wall Stove Board in position and drill 1/4” holes at marked locations around perimeter of shield, drilling at least 1” into the wall at the same time
• Remove Stove Board and insert wall anchors into each hole
• Reposition Stove Board and align holes
• Insert screws through Stove Board, aluminum spacers and into wall anchor. Do all four corners first. Do not tighten screws securely until all screws are in place
• When all screws in place, tighten the four corner screws first, then the rest
• Remove supports indicated in Step 1